INBDE - Integrated National Board Dental Examination

 What is the INBDE?

The Integrated National Board Dental Examination (INBDE) is the 500-item licensing exam administered by the American Dental Association (ADA) which allows graduate dental students to practice in the United States of America. The content of the INBDE is formulated by the Joint Commission on National Dental Examinations (JCNDE).

An Introduction to Dental Crowns

 

  • Dental Crowns


  • Crowns are a far more complex procedure than most people realise. To make a good quality crown, a dentist has to work in within a fraction of a millimetre. There is almost no margin for error. Getting the appearance correctly and communicating accurately with the dental lab can be an issue. Added to these, discussions about the balance between appearance and maintaining tooth tissue can be tricky. It can take a lot of painstaking adjustment at every step. Add in time pressure and any other added difficulties and it's a recipe for a stressed dentist, particularly if the dentist has recently graduated with limited experience. 


  • A calm and supportive dental nurse can work slickly with the dentist and makes the entire procedure easier. The roles of a good dental nurse and efficient lab technician are vital to the success of crowns.

  • Diagram showing transvers view of a tooth showing shape and thickness of a dental crown in pink colour.

  • Planning for Making a Crown

  • The first stage is the treatment planning, and deciding whether or not to place a crown. A decision has to be made about whether a filling is sufficient, whether a crown is most appropriate, or whether the tooth has become unrestorable and an extraction is the only choice. Crowns can be quite destructive due to the amount of tooth material to be removed. On the contrary, the advantage of the crowns is that they can be protective to the tooth and can help to hold the tooth together just like a helmet on the head, preventing the tooth splitting outwards, specifically after a root canal treatment. No restorative material can replace original tooth tissue so unnecessary tooth destruction must be avoided. so although they certainly have their place, crowns should not be placed without good reason.

  •  

  • The next big question comes is whether the patient's priority is the appearance or saving tooth tissue. Sometimes choosing to aim for the optimum appearance can be done without endangering the pulp of the tooth but at other times a compromise has to be made in order to keep the tooth alive and healthy. Some patients will be willing to accept a metal-coloured tooth quite happily to keep as much of their own tooth as possible because the metal crowns can be made much thinner, but for others that will not be an acceptable option.


  • At most occasions, compromises are done and agreed upon, like a metal band around the gingival margin of the tooth, or just having the visible part of the crown tooth coloured and the rest metal coloured. Discussing the patients' priorities and making sure that they know what exactly they will get end of treatment is a very important part of the process, to ensure their happiness and satisfaction.

  • Another important part of the planing is checking whether the tooth is vital. Often crowns are placed following root canal treatment. Therefore, it is important to check that any infection under the tooth has improved. If the tooth is not root canal treated, then vitality tests and radiographic examination is a must for long term prognosis.


  • Crown Preparation


  • The first stage of the crown preparation appointment is normally making an impression for making a temporary crown while the permanent crown is being fabricated. The impression can be made using alginate or putty. Alginate needs to be mixed smoothly and the impression needs to be accurate with no big air bubble in the relevant area specially the margins. Putty needs to be used if the impression may be needed at a later date, as alginate impressions soon lose their shape.


  • Then comes the actual ‘crown preparation’ stage. Local anaesthetic is normally given to anaesthetise the tissues around the tooth being prepared. Cutting the tooth for the crown is the time where the dentist's real skill is needed. The amount of tooth tissue removed and the space needed for the crown depends on the material to be used for each part of the crown. A thicker porcelain is needed for porcelain whereas metal need to be kept thinner. For a patient, the difference between little tooth tissue removal and too much removal is fairly small. The dentist will try to create a clear margin, ideally finishing on natural tooth rather than filling material, for the dental lab to work on. On one hand, a written laboratory authorisation form will communicate a lot of the information about the crown to be made, the work done on the actual tooth can give a lot of information about what the dentist is intending for the tooth and how they want the lab to make the crown. The margin needs to be clear in order for it to be picked up clearly in the impression so that the lab has something useful to work with and so that the end result is good.


  • Shade Selection


  • After the crown prep is completed, the shade(s) for the crown needs to be decided on, in the case of porcelain. A shade guide is used and the dentist will look at different shades compared with the surrounding teeth. If the crown is full porcelain, rather than part porcelain with metal underneath, the dentist may also record the colour of the tooth underneath that is being crowned. This can then be communicated to the lab, to give them a greater idea of what they are working with, as the underlying colour can shine through and affect the colour of the crown needed. Any little details wanted, for example, stains or slight cracks on the tooth, can also be recorded and communicated.


  • Before the patient leaves, the tooth needs to be temporised. This is where the tooth is covered in order to keep it safe and healthy while the crown is made by the lab. It also helps to prevent movement or further eruption of the tooth that could prevent the crown fitting. The impression taken earlier in the process is used; temporary crown material is put into the impression and the impression is put back over the tooth. A small blob of the material is often put somewhere to give an indication of when the material is set. Once the material has set, the impression and temporary crown is removed. The edges are smoothed off using polishing discs. Temporary cement is then used for cementing the temporary crown in place.


  • The dental laboratory will then make the crown. This is also a very complex process, but largely falls outside of the clinical practice. The dental technician will fill the impression with dental stone to create a model/die of the tooth to work on. The lab will work to the instruction of the dentist, creating what has been asked for. The process will vary depending on whether it is a full metal, a porcelain fused to metal or a full porcelain crown.


  • Once the crown returns back from the lab, the dentist will check that it is as they expected. They will check if the crown goes on and off on the model perfectly.


  • Crown Cementation


  • The temporary crown will be removed, the temporary cement will be cleaned off the underlying tooth and a cement will be decided upon. The crown will be tried in and out so that the dentist is certain about the placement of the crown. Cement will then be mixed and put into the crown, the tooth will be dried, and the crown will be placed. Excess cement will be cleared away using floss and dental instruments. Pressure will be maintained on the crown so that the cement sets with the crown fully seated/in the correct position.


  • The patient will then be asked how it feels to bite on. Often it will be slightly ‘high’, so the dentist will mark the teeth using articulating paper, so that the heavy contacts show up. Adjustments will then be made so that the crown is comfortable and doesn't interfere with the patient's bite.


  • Crowns can be a fabulous restoration, helping to save teeth that would otherwise have to be extracted. They can also be a very aesthetic option, particularly those made of/with porcelain. Crowns can be a very complex and involved procedure, but really demonstrate the important roles that different members of the dental team play in producing an end result that really meets the needs of/pleases the patient.

  •  

  • Summary of stages:

  1. Deciding whether a crown is the most appropriate restoration
  2. Planning the material(s) of the crown
  3. Taking an impression to allow a temporary crown to be made
  4. Shaping the tooth ready for the crown
  5. Temporising the tooth
  6. The crown is made by the lab
  7. The temporary crown is replaced with the permanent crown
  8. Any necessary adjustments are made.
Ref: British Dental Journal

Bacterial Infection of the Oral Cavity

 

Bacterial lesions causing ulcerative conditions in the oral cavity

  1. Syphilis
  2. Gonorrhoea
  3. Tuberculosis
  4. Leprosy
  5. Actinomycosis
  6. Noma
For paid courses, a detailed description of the bacterial infection of the oral cavity is given HERE.

Properties of Dental Materials- Terminology

You must know the properties of the materials used in dentistry to understand its function and how and why it works in oral cavity. It also helps in manipulating it. The main properties you should know about are following:

  • Stress
  • Strain
  • Elasticity Modulus
  • Elastic Limit
  • Thermal Expansion
  • Hygroscopic Expansion
  • Setting Expansion
To read the entire lecture (in premium Iridium course), click at the link HERE.

Annealing: Annealing is a process of heating and cooling of metal in a controlled manner. It is done/designed to produce desired properties in a metal. it is typically done to make the metal softer, increase ductility, stabilise the shape and improve/increase the machinability. When we talk about annealing of gold foil, it typically is done to remove surface contaminants just before the condensation.

Dental Anatomy and Terminology

Anatomy of the tooth and surrounding tissues

Enamel: This is the hard, calcified substance that makes the surface of a crown of a tooth.

Dentin: This is the calcified tissue that forms the major part of a tooth. In the crown of the tooth, the dentine is covered by enamel. The pulp
chamber of the tooth is surrounded by dentine.

Pulp: This is the organ at the centre of a tooth that contains blood vessels, connective and neural tissue, and cells that produce dentine-odontoblast. Blood vessels and neural tissue enter the tooth from the apex of the root.

Gingiva: This is the marginal part of the gum that surrounds the tooth where it emerges from the deeper, supporting tissues.

Periodontal ligament: This is the ligament that connects a tooth, by its root, to the supporting bone.

Cementum: This is the calcified tissue on the surface of the root of a tooth, which provides attachment for the periodontal ligament.

Fissure: It is a naturally occurring crevice in the enamel.

Crown: This is the part of the tooth that is visible and is above the gingival margin.

Root: This is the part of the tooth below the gingival margin; it is connected through cementum on its surface and the fibres of the periodontal ligament to the supporting bone.


Dental numbering system

There are numerous dental numbering systems to identify teeth and their maturity. The most commonly used system in Australia is the Federation Dentaire Internationale (FDI) system (see Figures). When communicating with a dentist, identify which numbering system is being used.

The FDI numbering system divides the mouth into quadrants. The first number indicates the quadrant and whether it is a primary or secondary tooth. The second number indicates the tooth; tooth numbering begins at the central incisor and counts backward to the molars.

Using the FDI numbering system, for adults, the quadrants are numbered as:

1. patient’s upper right is quadrant 1 
2. patient’s upper left is quadrant 2 
3. patient’s lower left is quadrant 3 
4. patient’s lower right is quadrant 4




For primary teeth in children, the quadrants are numbered as:

1. patient’s upper right is quadrant 5 
2. patient’s upper left is quadrant 6 
3. patient’s lower left is quadrant 7 
4. patient’s lower right is quadrant 8




Quick MCQ Test: 


Upcoming (Please check regularly to avail Free MCQ).

Ref: Therapeutic Guidelines 2019

Face bow

Face bow-for Whip mix Arcon articulator


Face bow is a device that is used to transfer the relationship of upper jaw to the temporomandibular joint and the skull. The use of face bow are as follows:

  1. in full mouth rehabilitation
  2. when you want to give accurate crown and bridges 
  3. when you need to alter VDO
  4.  for diagnostic mounting
  5. for the correction of the occlusion
  6.  when you want to use inter-occlusal records except when you are making tooth supported prosthesis or a single tooth restoration
  7.  when you are using cusp form teeth
  8.  when you need balanced occlusion
  9. when you want to do a gnathological study
Face bow for Hanau Non-Arcon Articulator

Multiple choice questions


JavaScript Quiz Project

INSTRUCTIONS:

1) The duration of the examination is 70 minutes.
2) After 70 minutes, the paper will not submit itself automatically so that you can keep on solving it. But, in the real exam, this will not happen, so try to finish it within the stipulated time frame.
3) Once you have finished answering the paper, press the submit button to see the answers .
4) After submission, you will see your result. The correct answer will be shown by a green tick and the wrongly answered question will have a red x in a circle. In either case you will get the correct answer in green colour and the explanation in magenta colour.
Your answers will not be saved automatically. Therefore, you need to write down your score yourself to keep a record of your progress
5) Once you are ready, press the start button.

START
Your Left Time is:

0% Complete

1
2
3
4
5
6
7
8
9
10
<-Previous
Next->
Submit Quiz

Dens in Dente

Dens invaginatus, dens in dente or tooth with in a tooth is a rare developmental anomaly. In it, the lingual pit is extended deep in to the crown or root, in later instance causing pulpitis. It is mostly seen in the maxillary lateral incisors but may be found in any anterior tooth.

Dens in Dente-lateral incisors

The cause of dens in dente in not known but role of genetic factor can not be established. In early stage, it can be treated by filling or endodontic treatment, if pulp is involved.

A. showing Type I Dens Invaginatus in lateral incisors. Note- periapical cyst. B. Type II dens invaginatus in second premolar and C. Type III dens invaginatus in mandibular canine. [1]

Ref: 
  1. https://www.omicsonline.org/scientific-reports/srep147.php

Hypertension

The 2017 ACC/AHA guideline for high BP in adults provides four BP categories based on the average of two or more in-office readings on 2 or more occasions:

  • Normal: Lower than 120 mm Hg systolic BP (SBP) and 80 mm Hg diastolic BP (DBP).
  • Elevated: 120–129 mm Hg SBP and lower than 80 mm Hg DBP.
  • Stage 1 hypertension: 130–139 mm Hg SBP or 80–89 mm Hg DBP.
  • Stage 2 hypertension: Higher than or equal to 140 mm Hg SBP or 90 mm Hg DBP.